SmartRunner Matcher*
Vision Configurator Software
2
018-
01
35
Mode menu item
You can enable or disable "Presentation mode" and "function keys 1 and 2" under the
Mode
menu item. "Presentation mode" and "function keys 1 and 2" are activated if checked and
deactivated if unchecked.
Figure 5.19
Mode menu item
Communication menu item
You can adjust the connection parameters between the sensor and computer under the
Communication
menu item.
Figure 5.20
Communication menu item
Designation
Function
Presentation mode
Mode of operation for presentation or testing without the assistance of
a PC
Designation
Function
RS-485 head address Address in the RS-485 bus. The address is sent with every RS485
command (see chapter 2.5) and is used for identification purposes if
multiple sensors are installed in the bus.
Baud rate
Data transfer speed setting. The default value of the sensor is 115200
bps. When you change the baud rate, the baud rate of the Vision
Configurator is automatically changed so that communication remains
possible.
Bus termination
Activates the integrated terminating resistor to terminate the RS-485
bus on the sensor
