2
018-
01
14
SmartRunner Matcher*
Installation
3
Installation
3.1
Storage and Disposal
Keep the original packaging. Always store and transport the device in the original packaging.
Store the device in a clean and dry environment. The permitted ambient conditions must be
considered, see datasheet.
Disposing of device, packaging, and possibly contained batteries must be in compliance with
the applicable laws and guidelines of the respective country.
3.2
Preparation
Unpacking the unit
1. Check that all package contents are present and undamaged.
If anything is damaged, inform the shipper and contact the supplier.
2. Check that all items are present and correct based on your order and the shipping
documents.
If you have any questions, please contact Fuchs.
3. Keep the original packing material in case you need to store or ship the unit at a later time.
3.3
Mounting the Sensor
The operating distance differs depending on the sensor. The correct operating distance can be
found in the datasheet for the sensor to be installed.
The following illustration shows all the relevant housing dimensions in mm:
Note!
Mounting an optical device
Do not aim the sensor at the sun.
Protect the sensor from direct long-term exposure to sun.
Prevent condensation from forming by not exposing the sensor to any major fluctuations
in temperature.
Do not expose the sensor to the effects of any aggressive chemicals.
Keep the lenses and reflector of the device clean. Clean with a soft cloth, using standard
commercial glass cleaner if necessary.
We recommend to clean the optical surface and to check screw fittings and electrical
connections at regular intervals.
