Pepperl+Fuchs SmartRunner Matcher, Manual, Page: 12 / 59

2
018-
01
12
SmartRunner Matcher*
Product Specifications
2.5 Interfaces
The RS-485 Interface
The reader is equipped with an RS-485 interface for communication purposes, i.e.,
parameterizing the reader functions or reading out current process data during operation. This
interface is operated in 8-E-1 operating mode and fitted with a terminator that can be activated
or deactivated by parameterizing the sensor head.
The RS-485 interface supports the following transfer rates:

38400 bit/s

57600 bit/s

76800 bit/s

115200 bit/s (default value)

230400 bit/s
Data structure of the RS-485 interface
3 Result (green/red)

Lights up green if a scanned profile matches a taught-
in profile

Lights up red if a scanned profile does not match a
taught-in profile
Applies in Code Card
mode

Lights up green when a correct code has been read

Lights up red when an incorrect code has been read

Off if no code has been read
4 Match 1/2
(green/yellow)

Lights up green if the scanned profile matches the
taught-in profile 1 (MATCH 1)

Lights up yellow if the scanned profile matches the
taught-in profile 2 (MATCH 2), optional
5 Diagnosis (red)

Lights up red if a bus error has occurred

Lights up red if a system error has occurred on the
interface controller

Flashes red if the sensor is in Update mode
6 POWER (green)

Lights up as soon as voltage is present

Flashes in Configuration mode
7 Teach in (yellow)

Lights up yellow during the teach in process
8 TRIGGER (yellow)

Lights up yellow if the hardware trigger signal is
activated
Position Designation Function