2
018-
01
22
SmartRunner Matcher*
Vision Configurator Software
Figure 5.1
Home screen
Wizard - Operation assistant for Vision Configurator
The
Wizard
complements the Vision Configurator configuration software. Double-click on the
Wizard button to launch the operation assistant. You will be guided step-by-step through the
individual settings.
Proceed as follows to launch the Vision Configurator.
Starting Vision Configurator
1. Select the
2-D/3-D
button on the "Sensor Family" tab.
2. Select
SMARTRUNNER
in the "parameter range" with connection type
RS485
.
3. Select the required
COM port
.
4. In the
Baud rate
window ensure that the value
115,200
is set. Otherwise select the value.
5. In the
Head address
window, ensure that the address is set to
Address 0
. Otherwise
select the address.
6. Use the
OK
button to confirm your settings.
The application window will open.