2
018-
01
28
SmartRunner Matcher*
Vision Configurator Software
5.5
Sensor Data
This section shows the connected device type and firmware version.
Figure 5.9
Device data
5.6
Image Display
You can evaluate the data recorded in the image display. By analyzing the recorded profile
form, it is possible to use the measurement result to make a qualitative assessment. This
enables intrusive reflections to be identified and eliminated. There is a relationship between
the exposure time and image blur. A correct exposure is dependent on the brightness of the
profile and the incident amount of light. An exposure time that is too short leads to
underexposed (too dark) images, an exposure time that is too long to overexposed images.
There are various options available to you to display and correct recorded data to avoid errors
during recording.
Image View
You can open the currently recorded image under the
Image View
tab. To do this, you must
click on the
Teach
>
Trigger laser
>
Get image
buttons in the toolbar.
Figure 5.10
Image View
The following context menu appears when you click the right mouse button over the recorded
image:
Figure 5.11
Image View context menu screen
x.x.x.xxxxx
