2
0
2
2
-1
0
66
Troubleshooting
Hardware Reset
As an alternative to reading the control code, you can reset the handheld reader using the trig-
ger buttons.
1.
Move the locking device on the bottom of the handheld reader in the direction of the arrow and
remove the battery.
2.
Press and hold both trigger buttons on the top of the handheld reader.
3.
Insert the battery into the handheld reader and hold down the trigger buttons. After a few
seconds, a number of beeps will sound in sequence.
4.
Then release the trigger buttons.
The function indicator of the handheld reader flashes green and the device beeps. The
handheld reader has now been restored to its default settings.
