Configuration
2
0
2
2
-1
0
31
3.
Complete the variables so that the command can be executed.
If a command is to be executed only for a specific code type, select the relevant code type in
the
Code symbology
column.
If a command is to be executed only if the read code begins with a certain character string,
input the character string in the
Prefix of read code
column.
If a command is to be executed only if the current processing result begins with a certain
character string, input the character string in
Prefix of current code
column.
To insert special characters, click on
Insert special characters
.
4.
If the source code is green, you can test the source code in the
Example
area. To do this, enter
a sample value in the
Read code
field.
The commands from the
Source code
area are applied to the sample value in the
Read
code
field and the result is displayed in the
Output
field.
Note
Note that JavaScript must always be deleted separately. To do this, click the
"Delete script from sensor" button, or read the following code with the
handheld reader.
Figure 4.5
Delete JavaScript
Note
If your Vision Configurator is open, you will need to reconnect to Vision Configurator after
scanning the control code. Follow the instructions to connect the handheld reader to Vision
Configurator, see chapter 4.2.1.
