2
0
2
2
-1
0
20
Configuration
In virtual COM mode, the handheld reader operates like an RS-232 series device.
Disabling Virtual COM Mode and Switching to USB Keyboard Mode
1.
Scan the following control code "USB Keyboard" to enter Keyboard mode.
2.
Scan the following control code "M20325_01" to deactivate the text commands.
3.
If you have activated the text command via a monitor program, you can deactivate it using the
command
++++FWCMSOR0<CR>
.
Example
Sending Text Commands
The Hercules program from HW group is one example of a monitor program
that can be used. In virtual COM mode, you can send the commands for beep
and trigger to the handheld reader, for example.
The following figure shows the two commands "Beep" and "Trigger:"
Figure 4.1
Example of beep and trigger commands
•
Beep
: RDCMXEV4P14<CR>
•
Trigger
: RDCMXEV1,P11.P20,P3500<CR>
