2
0
2
2
-1
0
14
Installation
3.3
Charging the Handheld Reader
Charging the Handheld Reader
1.
To charge the battery installed in the handheld reader, place the handheld reader in the
charging cradle, with the scanning window facing down.
The handheld reader emits a beep when it is turned off and activated. The handheld reader
emits an additional beep when it is coupled with the charging cradle and reconnects.
The battery status indicator starts flashing alternately for four secondsand lights up for one
second. When the battery is fully charged , the battery status indicator lights up continu-
ously.
Note
Charging Duration
The battery will be fully charged in approximately 3.5 hours when the charging
cradle is used with an external power supply. Charging time may vary when the
inductive charging cradle is connected to a PC USB connection.
Tip
Before First Use
It is recommendedthat the battery is fully charged before using the handheld reader for the first
time, even if a new battery has remaining capacitance.
To ensure sufficient battery power for the duration of a shift, always place the handheld reader
back in the charging cradle between activities.
