peplink APO-AC-MINI User Manual Download

Page: 55 / 59

The second table shows the MAC address of each LAN/WAN interface connected.

10.2 Client List

The

Client List

displays all currently connected clients. Use the

Expand

and

Collapse

buttons

to control the amount of data displayed.

10.3 Mesh / WDS Info

Here you can monitor the status of your Mesh or wireless distribution system (WDS) and track
activity by MAC address. This will display information for both the 2.4GHz and 5GHz radios.

OPYRIGHT

& T

RADEMARKS

are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

System Time

This shows the current system time.

Diagnostic

Report

The

Download

link is for exporting a diagnostic report file required for system investigation.

Remote

Assistance

Click

Turn on

to enable remote assistance.

Important Note

If you encounter issues and would like to contact the Peplink Support Team
(

https://contact.peplink.com/secure/create-support-ticket.html

), please download the diagnostic report

file and attach it along with a description of your issue.

Summary of Contents for APO-AC-MINI




























































Search results

Summary of Contents for APO-AC-MINI

Reviews:

Related manuals for APO-AC-MINI

Brands by name

Popular brands

peplink APO-AC-MINI, User Manual

Search results

Summary of Contents for APO-AC-MINI

Reviews:

Related manuals for APO-AC-MINI

Brands by name

Popular brands