peplink APO-AC-MINI User Manual Download

Page: 50 / 59

notifications.

9.7

Configuration

Backing up your Pepwave Access Point settings immediately after successful completion of the
initial setup is strongly recommended. The functionality to download and upload Pepwave
Access Point settings is found at

System > Configuration

OPYRIGHT

& T

RADEMARKS

are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Configuration

Restore

Configuration

to Factory

Settings

The

Restore Factory Settings

button is to reset the configuration to factory default

settings. After clicking the button, you will need to click the

Apply Changes

button on the

top right corner to make the settings effective.

Tick the

Network Settings

option to include the I P Address, Subnet Mask, Default

Gateway, DNS Server and Management VLAN ID

Download

Active

Configurations

Click

Download

to backup the current active settings.

Upload

Configurations

To restore or change settings based on a configuration file, click

Choose File

to locate the

configuration file on the local computer, and then click

Upload

. The new settings can then

be applied by clicking the

Apply Changes

button on the page header, or you can cancel

the procedure by pressing

discard

on the main page of the web admin interface.

Summary of Contents for APO-AC-MINI




























































Search results

Summary of Contents for APO-AC-MINI

Reviews:

Related manuals for APO-AC-MINI

Brands by name

Popular brands

peplink APO-AC-MINI, User Manual

Search results

Summary of Contents for APO-AC-MINI

Reviews:

Related manuals for APO-AC-MINI

Brands by name

Popular brands