Once you’ve specified a local ID, click the
New Profile
button to configure PepVPN.
C
OPYRIGHT
& T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
PepVPN Profile Settings
Enable
Check this box to enable PepVPN.
Name
Enter a name to represent this profile. The name can be any combination of
alphanumeric characters (0-9, A-Z, a-z), underscores (_), dashes (-), and/or
non-leading/trailing spaces ( ).
Encryption
By default, VPN traffic is encrypted with
256-bit AES
. If
Off
is selected on both sides of
a VPN connection, no encryption will be applied.
Remote ID
To allow your access point to establish a VPN connection with a specific remote peer
using a unique identifying number, enter the peer’s ID or serial number here.
Authentication
Select
By Remote ID Only
or
Preshared Key
to specify the method your access point
will use to authenticate peers. When selecting
By Remote ID Only
, be sure to enter a
