peplink APO-AC-MINI User Manual Download Page 48

Page: 48 / 59

To define a user name for SNMPv3, click

Add SNMP User

in the

SNMPv3 User Name

table,

upon which the following screen is displayed:

OPYRIGHT

& T

RADEMARKS

are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Enable

Enable the SNMP community

Community

Name

This setting specifies the SNMP community name.

IP Address &

IP mask

This setting specifies a subnet from which access to the SNMP server is allowed. Enter

subnet address here (e.g.,

192.168.1.0

) and select the appropriate subnet mask.

Access Mode

Choose between

Read Onl

y and

Read and Write

SNMPv3 User Settings

Enable

Enable the SNMPv3 user.

SNMPv3 User

Name

This setting specifies a user name to be used in SNMPv3.

Authentication

Protocol

This setting specifies via a drop-down menu one of the following valid authentication
protocols:

●

HMAC-MD5

●

HMAC-SHA

Authentication

Password

Password for SNMPv3 authentication.

Confirm

Authentication

Password

Confirm password for SNMPv3 authentication.

Privacy Protocol

This setting specifies via a drop-down menu one of the following valid privacy
protocols:

●

None

Summary of Contents for APO-AC-MINI




























































Search results

Summary of Contents for APO-AC-MINI

Reviews:

Related manuals for APO-AC-MINI

Brands by name

Popular brands

peplink APO-AC-MINI, User Manual

Search results

Summary of Contents for APO-AC-MINI

Reviews:

Related manuals for APO-AC-MINI

Brands by name

Popular brands