peplink APO-AC-MINI User Manual Download Page 40

Page: 40 / 59

OPYRIGHT

& T

RADEMARKS

are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Distance / Time

Convertor

This slider and text entry field can be used to interactively set slot time.

Slot Time

This field provides the option to modify the unit wait time before your access point
transmits. The default value is

μs

ACK Timeout

Set the wait time to receive an acknowledgement packet before retransmitting. The
default value is

μs

Frame

Aggregation

With this feature enabled, throughput will be increased by sending two or more data
frames in a single transmission.

Aggregation

Length

This field is only available when

Frame Aggregation

is enabled. It specifies the frame

length for frame aggregation. By default, it is set to

50000

Max number of

Clients

Enter the maximum clients that can simultaneously connect to your access point or set
the value to

to allow unlimited clients.

Client Signal

Strength

Threshold

This field determines the minimum acceptable client signal strength, specified in
megawatts. If client signal strength does not meet this minimum, the client will not be
allowed to connect.

Advanced Features

Discover Nearby

Check this box to enable network discovery. Note that setting

Channel

Auto

will

activate this feature automatically.

Summary of Contents for APO-AC-MINI




























































Search results

Summary of Contents for APO-AC-MINI

Reviews:

Related manuals for APO-AC-MINI

Brands by name

Popular brands

peplink APO-AC-MINI, User Manual

Search results

Summary of Contents for APO-AC-MINI

Reviews:

Related manuals for APO-AC-MINI

Brands by name

Popular brands