45
1
Gettin
g
Sta
rte
d
If you accidentally select the wrong language and go to the next procedure, perform
the following operation to set the language back.
When the Wrong Language Has Been Inadvertently Selected
1
Press the four-way controller (
5
).
2
Use the four-way controller (
2345
) to select the language
and press the
4
button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in the Wrong Language
1
Press the
3
button.
This exits the settings screen and returns the camera to capture mode.
2
Press the
3
button.
The [
A
Rec. Mode] menu appears.
3
Press the four-way controller (
5
) twice.
4
Use the four-way controller (
32
) to select [Language/
].
5
Press the four-way controller (
5
).
The [Language/
] screen appears.
6
Use the four-way controller (
2345
) to select the
language.
7
Press the
4
button.
The [
W
Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown], [Date]
and [Time], refer to the pages below for instructions.
• To change [Hometown], follow the steps in “Setting the World Time” (
1
p.180).
• To change the date and time, follow the steps in “Changing the Date and Time”
(
1
p.176).
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. See the following pages for information on
the available video output formats and how to change the initial settings.
• Video output formats available initially: “List of World Time Cities” (
1
p.232)
• To change the video output format: “Changing the Video Output Format” (
1
p.187).
