155
5
Edi
ting and Pr
in
ting
Optional Frames
The optional frames are stored in the CD-ROM supplied with the camera. To use
these frames, copy them from the CD-ROM. These optional frames are deleted if the
files on the built-in memory are deleted with a computer or if the built-in memory is
formatted.
To Copy Frames
1
Remove the SD Memory Card from the camera.
If you leave the SD Memory Card in the camera, the frames will be copied onto
the card, not into the camera’s built-in memory.
2
Connect the camera to the computer using the provided
USB cable.
Refer to “Connecting to a Computer” (p.197) for instructions on connecting the
camera to a computer.
3
When the device detection window opens, click [Cancel].
4
Insert the CD-ROM into the CD-ROM/DVD drive.
5
When the installer window opens, click [EXIT].
6
If there is not already a “FRAME” folder in the root directory
of the camera (Removable Disk), create the folder.
7
Copy the desired files from the FRAME folder in the root
directory of the CD-ROM to the FRAME folder on the camera
(Removable Disk).
For information on working with files on your computer, refer to the instruction
manual supplied with the computer.
8
Disconnect the USB cable from the computer and camera.
Refer to “Connecting to a Computer” (p.197) for instructions on disconnecting
the camera from a computer.
• Frames can be stored both in the built-in memory and on the SD Memory Cards,
but using large numbers of frames may slow down processing times.
