192
7
Se
ttings
Pixel Mapping is a function for mapping out and correcting for defective pixels in
the CCD sensor. Run the Pixel Mapping function if image dots always seem to be
defective in the same place.
1
Use the four-way controller (
23
) to select [Pixel Mapping] on
the [
W
Setting] menu.
2
Press the four-way controller (
5
).
The [Pixel Mapping] screen appears.
3
Use the four-way controller (
2
) to
select [Pixel Mapping].
4
Press the
4
button.
Defective pixels are mapped and corrected.
Perform Pixel Mapping
• Pixel Mapping is only accessible from
A
mode. Pixel Mapping cannot be
selected even if the [
W
Setting] menu is displayed by pressing the
3
button in
Q
mode.
• When executing Pixel Mapping from
Q
mode, press the
Q
button once
to enter
A
mode. Then press the
3
button and the four-way controller
(
5
) to display the [
W
Setting] menu and select Pixel Mapping.
• Pixel Mapping cannot be selected in
O
(Voice Recording) mode.
When the battery level is low, [Not enough battery power remaining to
activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit
K-AC117 (optional) or use a battery with ample capacity remaining.
OK
OK
Pixel Mapping
Checks the image sensor
and corrects defective
pixels
Pixel Mapping
Cancel
