103
3
Ta
king
Pict
ures
You can set this function to correct for camera shake when taking still shots. If
Pixel Track SR is set to
O
(On), the camera automatically corrects for camera
shake in the images you shot. The default setting is
P
(Off).
1
Use the four-way controller (
23
) to select [Pixel Track SR] on
the [
A
Rec. Mode] menu.
2
Use the four-way controller (
45
) to switch between
O
(On)
or
P
(Off).
O
(On)
Automatically corrects for camera shake.
P
(Off)
No correction for camera shake.
The setting is saved.
• When the Sensitivity is set to 125 or 200 and Highlight Correction is set to
O
(On), the setting changes to 250. The setting returns when Highlight
Correction is set to
P
(Off).
• If you change the [Highlight Correction] or [Shadow Correction] setting
frequently, you can save time by assigning it to the Green button (p.105).
D-Range setting cannot be set in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
Setting Pixel Track SR
Shake Reduction settings in
C
(Movie) and
(Underwater Movie) mode
are configured under Movie SR (p.116).
• Pixel Track SR cannot be set in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
• Pixel Track SR does not function when the flash discharges even if [Pixel
Track SR] is set to
O
(On).
Pixel Track SR may not be effective when the shutter speed is slow. We
recommend you turn off the [Pixel Track SR] setting
P
(off) and use a tripod
for slow shutter speeds.
