Pentax K-5II, Operating Manual

Page: 300 / 336

298
Appe
ndix
11
*5 The [Distortion Correction] setting is disabled when using the DA 10-17mm FISH-EYE
lens.
*6 To use an FA SOFT 28mm F2.8 lens, FA SOFT 85mm F2.8 lens, or F SOFT 85mm F2.8
lens, set [27. Using Aperture Ring] to [Permitted] in the [
A
Custom Setting 4] menu.
Pictures can be taken with the aperture you set, but only within manual aperture range.
*7 Only available with K
AF2
mount FA lenses.
*8 Only available with an FA 31mm F1.8 Limited, FA 43mm F1.9 Limited, or FA 77mm F1.8
Limited lens.
*9 The focusing area is fixed to
U
(Center).
*10 c (Aperture Priority Automatic Exposure) mode with the aperture set wide open.
(Adjusting the aperture ring has no effect on the actual aperture value.)
DA lenses with a motor and FA zoom lenses with a power zoom function
use the K
AF2
mount. DA lenses with a motor and no AF coupler use the
K
AF3
mount.
FA single focal length lenses (non-zoom lenses), DA or DA L lenses
without a motor and D FA, FA J and F lenses use the K
AF
mount.
Refer to respective lens manuals for details.
When the aperture ring is set to other than the
s
(Auto) position or a lens
without an
s
position or accessories such as an auto extension tube or
auto bellows are used, the camera will not operate unless [27. Using
Aperture Ring] is set to [Permitted] in the [
A
Custom Setting 4] menu.
Refer to “Using the Aperture Ring” (p.299) for restrictions that apply.
The built-in flash cannot be regulated and fully discharges when the
aperture ring is set to other than the
s
(Auto) position, pre A lenses or soft
focus lenses are used.
Note that the built-in flash cannot be used as an Auto Flash.
Lens Names and Mount Names
Lenses and Accessories that Cannot be Used with this Camera
Lens and Built-in Flash