Pentax K-5II, Operating Manual

Page: 194 / 336

192
Sho
o
ting
Setti
ngs
6
2
Press the four-way controller (
5
)
and use the four-way controller
(
23
) to select [Off], [Auto],
[Standard], [Strong 1], [Strong 2]
or [Strong 3].
3
Press the 4 button.
4
Use the four-way controller (
23
) to select [Auto Align]
and use the four-way controller (
45
) to select
P
or
O
.
5
Press the
3
button twice.
The camera is ready to take a picture.
P
[Shake Reduction] is fixed to
l
(Off). Use a tripod to prevent
camera shake when taking pictures. (default setting)
O
The Shake Reduction function operates according to the Shake
Reduction setting at that point. HDR Capture can be used without a tripod.
[Program Line] (p.89) is fixed to
l
(Hi-speed Priority) and [AUTO
ISO Parameters] (p.84) is fixed to
a
(Fast).
• During HDR Capture, pressing the 3 button while an image is being
saved cancels the process and saves the image as a standard image.
• When both [Shake Reduction] and [Auto Align] are set to on, be careful of the
following points.
- Make sure to hold the camera firmly so that the composition of the picture
does not change while the three images are taken. If there is a great
difference of the composition between three images, [Auto Align] may not
be possible.
- Images taken with HDR Capture are susceptible to camera shake and blur.
Be sure to set a higher shutter speed and a higher ISO sensitivity.
- When the exposure mode is set to e (Program Automatic Exposure),
[Program Line] is set to
l
(Hi-speed Priority).
- When the ISO sensitivity is set to [ISO AUTO], the sensitivity can be raised
more easily than normal.
- [Auto Align] may not be possible for lenses that have a focal length
exceeding 100 mm.
- When the entire subject is checkered or has a uniform surface, [Auto Align]
may not be possible.
HDR Capture
Auto Align
HDR Capture
Cancel OK OK MENU
HDR HDR
AUTO AUTO
HDR HDR
OFF OFF
HDR HDR
HDR
HDR
HDR HDR
HDR HDR