![background image](http://html1.mh-extra.com/html/pentair/ultratemp/ultratemp_installation-and-user-manual_1524623002.webp)
If you have questions about ordering Pentair Aquatic Systems (“Pentair”) replacement parts, and pool products,
please use the following contact information:
CUSTOMER SERVICE / TECHNICAL SUPPORT
Customer Service (8 A.M. to 4:30 P.M. — Eastern
and Pacific Times)
Phone: (800) 831-7133
Fax: (800) 284-4151
Web site
visit www.pentairpool.com or www.staritepool.com to
find information about Pentair products.
Technical Support
Sanford, North Carolina (8 A.M. to 4:30 P.M. ET)
Phone: (919) 566-8000
Fax: (919) 566-8920
Moorpark, California (8 A.M. to 4:30 P.M. PT)
Phone: (805) 553-5000 (Ext. 5591)
Fax: (805) 553-5515
TABLE OF CONTENTS
UltraTemp
®
Heat Pump Installation and User’s Guide
Important Warning and Safety Instructions .......
Operator Set Up and Control Panel Menus .......
Before Installing the Heat Pump .........................
Heat Pump Overview and Features
Heat Pump Installation Requirements
General Installation Information
Installation and Location .....................................
Materials Needed for Installation
Equipment Pad
Drainage and Condensation, Roof Run Off,
and Lawn Sprinklers
Heat Pump Dimensions
Location and Clearances
Anchor Clamp Installation
Water Connections and Plumbing
Automatic Flow Control Valve
Water Pressure Switch Adjustment
Multiple Unit Installation
Heat Pump, Heater, Solar
Multiple Heat Pump Connections
Electrical Connections and Wiring
Wiring Diagram – (Single Phase – 50/60 Hz)
Wiring Diagram – (Three Phase – 60 Hz)
Wiring Diagram – (Three Phase – 50 Hz)
Connecting to an Automation System ...............
Remote Operation/Relay Remote Controls
Connecting to IntelliTouch
or EasyTouch
via Heat Pump Spade Terminals
Connecting to IntelliTouch
or EasyTouch
via RS-485 Connector
Pin Configuration for Heat Pump Control
Board to IntelliTouch
Connecting IntelliTouch
or EasyTouch
to the Heat Pump
ii
iii
1
1
1
1
2
2
2
2
2
3
3
4
4
5
6
6
6
8
9
10
11
12
12
13
14
15
15
For pool energy saving tips, refer to page 16, under “Operating the Heat Pump”. For technical data, voltage
requirements, or ambient/water flow information, refer to page 25 at the back of the manual.
Operating the Heat Pump ..................................
Swimming Pool Energy Saving Tips
Heat Pump Control Panel Overview
Operator Setup Menu Tree Guide
Pump Start Time (for AutoSet)
Intelli Address
Set Water Temperature Offset
Defrost Cycle
Locking the Control Panel
Control Panel Menu Tree Guide
Stopping and Starting the Heat Pump
Changing the Set Point - Pool and Spa
Heat, Cool, and Auto Modes
Activate Heat Pump Timer
Relay Remote
Serial Remote
AutoSet Operation
Timers and Delays
Control Panel Alarm Messages
Maintenance .......................................................
Water Chemistry
Winterizing
Spring Start Up
Inspection and Service
Owner Inspection
Professional Maintenance and Service
Technical Information ........................................
Electrical Supply - Voltage Requirements
Temperature Resistance Chart
Ambient/Water Flow Table for Professional
Maintenance and Service
Heat Pump Pressure Drop
Troubleshooting .................................................
Replacement Parts .............................................
Illustrated Parts View
Parts List
16
16
16
17
17
17
18
18
18
19
20
20
20
20
20
21
21
22
22
23
23
23
23
23
23
24
25
25
25
26
26
27
31
31
32
P/N 474099 Rev. H 1/23/1
4
i