Installer manual Siata V132 - SFE - Maintenance
68 / 88
Ref. MKT-IM-003 / B - 19.04.2017
9.2.8. Replacing the pilots (external drivers connections)
No.
Operation
A
Using a screwdriver, unscrew the screw (
1
).
B
Remove the controller with the pilots (
4
) from the valve body (
3
).
C
Unscrew and remove the screws, the nuts and the washers (
2
).
D
Remove the clamping plate (
6
).
E
Remove and change the pilots (
5
).
Note
Replace the entire pilot (
5
) in case of damage.
F
Replace and grease all the O-rings with silicone grease (cod. 8500).
G
Reverse above procedure steps to rebuild.
Note
Pay attention to the pilot order. The pilot with two holes (
8
) is placed next to the controller,
the others pilots with four holes (
7
) follow.
Note
The number of pilots can vary according to the valve configuration.
Caution
When reassembling, be sure to place the O-rings between each pilot.
A
A
A
A
Summary of Contents for Siata V132 SFE
