Pentair Siata V132 SFE Installer Manual Download

Page: 57 / 88

Installer manual Siata V132 - SFE - Maintenance

Ref. MKT-IM-003 / B - 19.04.2017

57 / 88

Maintenance

Mandatory



Cleaning and maintenance shall take place at regular intervals in order to guarantee the

proper functioning of the complete system.

Danger



Any valve maintenance operation must be carried out in the absence of hydraulic pressure.
For this reason, disconnect the water delivery line to the valve.

9.1. Recommendations

9.1.1. Use original spare parts

Caution



To ensure correct operation and safety of the device, only use original spare parts and

accessories recommended by the manufacturer.

Parts to keep in stock for potential replacements are the motor, controller, transformer, injectors, O-
ring kit and DLFC.

9.1.2. Use original approved lubricants

•

Silicone grease (cod. 8500)

9.1.3. Maintenance instructions

•

Disinfect and clean the system at least once a year or if the treated water has an off-taste or an
unusual odour.

•

Perform a hardness test every year for softeners.

Summary of Contents for Siata V132 SFE

























































































Search results

Summary of Contents for Siata V132 SFE

Reviews:

Related manuals for Siata V132 SFE

Brands by name

Popular brands

Pentair Siata V132 SFE, Installer Manual

Search results

Summary of Contents for Siata V132 SFE

Reviews:

Related manuals for Siata V132 SFE

Brands by name

Popular brands