Page 21
AUTO HEATER
SPA 25°C / 35°C
AIR 20°C
MON 09:30 AM
EasyTouch
®
Control System Outdoor Control Panel
You can fully automate your pool, spa, and lighting operations from the EasyTouch control system outdoor
control panel or from the optional EasyTouch control system indoor control panel and EasyTouch wireless
control panel. The EasyTouch control system menu features let you create customized schedules for your
pool and spa equipment, heat temperatures, and chlorination settings to switch on and off at a set day and
time. Scheduled automatic operations can be performed at either the outdoor control panel, the optional
indoor control panel and wireless control panel. For maintenance and service purposes, the outdoor control
panel button allows manual control of all pool and spa operations. For menu options, refer to “EasyTouch
Menus,” on page 14. The following describes the outdoor control panel buttons, and LED indicators.
EasyTouch Control System Controls and Buttons
Liquid Crystal Display (LCD):
The main system display consists of a 16 x 4 alphanumeric
character LCD with EL backlighting for easy viewing of the menu items and status messages.
Press the Menu button twice to refresh the display.
Up/Down buttons:
Use the Up and Down buttons to scroll through the main menu items and
to adjust or change settings. Use these buttons after pressing the Menu button to access
the main menu items. While editing settings, press and hold the Up or Down button to fast
forward or fast reverse through settings and values.
Left button:
When in pool or spa mode use the Left and Right button to adjust the
temperature level. Press the Left button to lower the set point water temperature. Press
the Filter Pump (F) button to display the current water temperature. Use the Left button to
scroll through sub-menu selections, setting and values. While editing settings, press and
hold the Left button to fast reverse through settings and values.
EasyTouch Control System (8 AUX) Outdoor Control Panel
4 5
6
7 8
9
10
1
3
2
11
12
13
AUTO:
The system is in normal operating mode. Scheduled programs will run auto-
matically.
HEATER:
Displays the current heat source (Off, Heater, Solar Prf., Solar) when in
“Pool” or “Spa” mode, and heat source is enabled (Heater button LED on).
POOL (SPA):
Indicates that the unit is in “Pool” or “Spa” mode. If this display line is
blank, it indicates no spa or pool function is active.
25°C / 35°C:
Displays the actual spa or pool water temperature (25°C) and the set
point temperature (35°C) as set in the “Heater” menu.
AIR:
Displays the actual outside air temperature (20°C) as read by the air sensor.
Day and Time:
Displays the EasyTouch system day and time as specified in the “Clock”
menu settings (see page 31).
Controls
