background image

15

«PELLENC SA» TERMS OF WARRANTY AND NON-RESPONSIBILITY CLAUSE

MACHINE RANGE FOR OEP

In the event of failure of a mechanical part and subject to normal, rational use and maintenance in 

compliance with the maintenance manual, 

PELLENC sa guarantees its products for a period of 

ONE YEAR

 as of delivery; this time shall not exceed a period of 18 months following departure from 

the factory of the equipment under warranty : on one hand in accordance with the conditions stipulated 

in the warranties of PELLENC sa and on the other hand subject to the delivery report indicating the 

commissioning date was made known to PELLENC sa.

In the event of an accident and total or partial destruction of the product, PELLENC sa’s warranty can 

only be granted, and their responsibility engaged, if the party claiming the warranty can provide technical 

proof specifying the origin of the accident, a defect in materials or a structural defect and the product 

components which are the cause of it.

This contractual warranty excludes any other responsibility of PELLENC sa, whether implicit or explicit. For 

this reason, the responsibility of PELLENC sa can not exceed the limits defined above and covers, to a 

limited extent, repair 

or 

replacement, as chosen by PELLENC sa, of parts recognized to be defective and, 

when applicable, the labour required to perform the repair or replacement on the basis of warranty time as 

defined by PELLENC sa.

Any maintenance or repair work whatsoever carried out during the warranty period shall mandatorily be 

performed by PELLENC sa or by a PELLENC sa authorized dealer, under penalty of forfeiture of the 

warranty.

All costs arising from the immobilization, movement, approach and transport shall be, in all events, for the 

sole account of the purchaser.

As concerns parts or equipment that are not manufactured by PELLENC sa, in particular ball screw, 

battery, etc., the warranty is limited to that of the suppliers to PELLENC sa. Normal wear parts worn out as 

the result of use are never under warranty.

PELLENC sa and the authorized dealer shall not be liable in the following cases

:

• 

Malfunctions due to faulty servicing, user inexperience or abnormal use.

•  Failure to perform overhauls and checks in accordance with manufacturer’s instructions.

•  Replacement of genuine parts or accessories with parts of accessories of another origin, or when the 

machine sold has been transformed or modified.

This warranty is explicitly limited to the terms defined above. 

PELLENC sa shall not be liable, under any 

circumstances, for payment of any indemnity for any reason whatsoever

.

However, it is specified, in compliance with the provisions of decree No. 78.464 dated March 24th 1978, 

that this contractual guarantee does not replace the legal guarantee which obliges the seller to guarantee 

the buyer against the consequences of defects or hidden defects of the object sold.

Summary of Contents for FIXION



















































Reviews: