SOIL CULTIVATOR CULTIVION
58_80347-P
4.2.1. MOUNTING THE BLADE ASSEMBLY
1. Insert the two nuts (15) in the spaces provided in the
mounting part (16).
2. Position the weeding blade (10) on the mounting
part (16).
3. Fit the tightening screws (17).
4. Tighten the screws (17) using a 5 mm hex socket
and a torque wrench.
Important
Tightening torque: 6 N.m
Important
Never work with the tightening screws (17) loos-
ened.
Note
The procedure is identical for all blade models. Only
the weeding blade is shown here.
4.2.2. FITTING THE BLADE MOUNTING ASSEMBLY ONTO THE TOOL
1. Once fitted together, position the blade mounting as-
sembly (9) on the shaft (18), aligning the mark on
the mounting part (16) with the "0" mark on the head
casing(19).
Note
The head of the machine has a graduated rotating
shaft from -4 to +4, passing through a 0 position.
For further information on how to adjust the working
tool head position, see pages Section 5.7, “Setting
the tool head tilting positions”.
13
