SOIL CULTIVATOR CULTIVION
58_80347-P
5.6. SPEED SELECTOR
Your Cultivion has a speed selector (2) on the rear han-
dle. This speed change system allows you to optimize
the desired quality of work.
Four LEDS (3) on the handle indicate the selected speed
level when the machine is On.
These LEDs (3) will flash if the tool approaches the tem-
perature safety threshold.
1 LED on
Speed 1 (800 strokes/ min)
2 LEDs on
Speed 2 (830 strokes/ min)
3 LEDs on
Speed 3 (860 strokes/ min)
4 LEDs on
Speed 4 (885 strokes/ min)
5.7. SETTING THE TOOL HEAD TILTING POSITIONS
1. Remove the assembly: tightening screw (22), wash-
er (21) and nut (20) using a 5 mm hex. wrench.
2. Take off the working tool assembly
Important
Be careful not to lose the nut (20) and washer
(21).
3. Position the blade mounting assembly (9) on the
shaft (18), aligning the mark on the mounting part
(16) with the mark for the desired tilt (between -4 and
+4).
4. Push the working tool support into the casing (19)
until it clicks into place.
23
