SOIL CULTIVATOR CULTIVION
58_80347-P
2. Place the nut (20) in the position provided on the
mounting part (16).
3. Fit the washer (21) and screw (22).
4. Tighten the screw (22) using a 5 mm hex socket and
a torque wrench.
Important
Tightening torque: 12 N.m
Important
Do not forget the nut (20) and the washer (21) during assembly.
4.3. FITTING THE BATTERY ON THE HARNESS
To mount the battery on your harness, refer to the mounting instructions provided with your harness.
Important
After mounting, the battery must be solidly attached and secured on your harness. If this is not the case then
the mounting needs to be re-checked.
14
