SOIL CULTIVATOR CULTIVION
58_80347-P
4.4. CONNECTING POWER CORD TO THE TOOL
1. Connect the power cord (12) to the Soil Cultivator on
the connector located on the rear handle of the tool.
2. Screw it in all the way.
3. Check that the power cord is properly connected.
4.5. CONNECTING PELLENC BATTERIES TO THE TOOL
Important
Always check the remaining battery-life before use. If necessary, recharge the battery using the charger.
To prolong the life of the connectors, it is advisable to protect them when they are disconnected. Avoid leaving
the connectors in contact with abrasive or dirty surfaces, or subjecting them to major impacts (falls).
4.5.1. 250 BATTERY
1. Connect the power cord (12) of the Soil Cultivator to
the connector on the battery.
2. Screw it in all the way.
3. Check that the power cord is properly connected.
15
