Peg-Perego Viaggio 2-3 Flex Surefix, Instructions For Use Manual, Page: 26 / 162

20
REMOVING THE LINING FROM THE
HEADREST:
28
• To remove the plastic cover on the
back of the headrest, unfasten the two
side hooks.
29
• Release the bottom (1) and top (2)
as shown.
30
• To remove the headrest lining,
slightly raise the headrest and release
the two elastics on one side (fig_a)
and then on the other (fig_b). Remove
the lining.
Maintenance and cleaning
of the fabric lining
Brush the fabric parts to remove dust.
• Follow the washing instructions on the
label sewn onto the seat's lining. (fig. 21)
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
Repositioning the car seat
cover:
RELINING THE SEAT:
31
• Insert the plastic panel in the pocket
of the seat lining.
32
• Slip the seat lining on from the
front (fig_a), inserting the profile in the
appropriate slot (fig_b).
33
• Insert the two hooks on the base
of the seat near the bottom of the
backrest.
34
• Finally, attach the two side eyelets
to the buttons on the sides of the seat.
RELINING THE BACKREST:
35
• Slightly widen the side wings of the
car seat and insert the plastic flaps into
their slots in the backrest, ensuring they
come out below as shown in figure.
36
• Slip on the side lining and fasten the
two upper elastic bands; repeat for the
lower elastic bands.
37
• Fasten the four side eyelets to the
appropriate buttons.
RELINING THE HEADREST:
38
• Slightly raise the headrest and put
the lining back in place, fastening the
two elastics as shown, first on one side
(fig_a) and then on the other (fig_b),
and paying attention to the white
polystyrene.
39
• Fasten the back cover along
the three central points above the
adjustment handle, following the
sequence shown in the figure.
40
• Finally, fasten the two sides to the
headrest.
How to fold the car seat
41
• Lower the headrest (1), tighten
the side restraining wings (2) and, if
necessary, push in the cup holders (3).
42
• Pull the ribbon upwards (1) to
release the backrest and at the same
time push the backrest down (2); this
will fold down onto the car seat.
43
• Attach the ring that fastens the
backrest to the seat when the product
is closed.
Transport
44
• Viaggio 2-3 Flex is easily carried
using a handy transport handle