42
BOILER CONTROL: INTERNAL WIRING & OPERATION
Menu Item
Function/Description
Units
Metric (
O
C, bar)
Select Metric units
O
C/bar
Imperial (
O
F, psi)
Select Imperial units
O
F/psi
Table 8.J.1.2: Settings -> General Settings -> Unit Type
Menu Item
Function/Description
Default Value
Date
Set the current Date
day, mm-dd-yyyy
Time
Set the current Time
hh:mm:ss
Time Zone Settings
Enter the Time Zone Settings menu
Display Settings
Enter the Display Settings menu
Table 8.J.1.3.0: Settings -> General Settings -> Date & Time
Menu Item
Function/Description
Units
Default Value
Time Zone Correction
Set the Time Zone Correction
UTC -12:00 to UTC +14:00
UTC +00:00
Daylight Savings Time
Select the Daylight Savings Time mode
Disabled
Europe
N, C America
Disabled
Table 8.J.1.3.1: Settings -> General Settings -> Date & Time -> Time Zone Settings
Menu Item
Function/Description
Units
Default Value
Time Notation
Select 24h or 12h Time Notation
24h/12h
24h
Date Order
Select the Date-format
MDY
DMY
YMD
MDY
Day of Month
Select how the Day of Month is displayed
1 or 2 digits
2Digits
Month
Select how the Month is displayed
1 or 2 digits
Short Text
Full Text
2Digits
Year
Select how the Year is displayed
2 or 4 digits
4Digits
Date Separation Character
Select the Date Separation Character
“_”
“ “
“.”
“/”
“_”
Day of Week
Select how the Day of Week is displayed
Disabled
Short Text
Full Text
Short Text
Seconds
Select if Seconds are displayed
yes/no
Yes
Table 8.J.1.3.2: Settings -> General Settings -> Date & Time -> Display Settings
Menu Item
Function/Description
Full
Select Full cascade mode (setup for max. 8 burners where the 900PB requires information
from the depending burners).
Basic
Select Basic cascade mode (setup for max. 16 burners, where the 900PB does not require information
from the dependent burners, which results in a faster bus communication).
Table 8.J.1.4: Settings -> General Settings -> Cascade Mode
Menu Item
Function/Description
Units
Default Value
Status Overviwe Settings
Enter Status Overview Menu
Modbus Address
Select the Modbus Communication Address
0...255
1
Modbus Stopbits
Select the no. of Modbus Communication stop bits
1 - 2
2
Table 8.J.1.5: Settings -> General Settings -> Other Settings
