Peco 56651201 Operator'S Manual Download Page 4

4

New PECO, Inc. extends the following warranties to the ORIGINAL PURCHASER of each New PECO, Inc. consumer product 
purchased from one of our Dealers or directly from New PECO, Inc., subject to the following limitations:

 

 

A.  ITEMS COVERED UNDER WARRANTY

:

 

1.  PRODUCT WARRANTY –

 

Any part or parts which are deemed defective in material or workmanship, as delivered to the 

original purchaser, will either be repaired or replaced, as New PECO, Inc. elects, without charge for parts or labor, if 
the defect appears within 12 months from the date of purchase of the product to the Original Purchaser.  

 

2.  PARTS REPLACED DURING WARRANTY  –

 

Any New PECO, Inc. part which is furnished in performance of this warranty 

and is defective in material or workmanship as delivered to the purchaser will be repaired or replaced, as New PECO, 
Inc. elects, before the expiration of the original warranty period.

 

 

 

B.  WARRANTY DISTINCTIONS

:

 

1.  RESIDENTIAL -

 

Products put to a personal use around a single household or residence are considered Residential.  

Products designated as “Residential” are warrantied for 12 months from the date of purchase of the product, to the 
ORIGINAL PURCHASER with proof of purchase, when used for or in residential applications.

 

2.  COMMERCIAL –

 

Products put to any business use (agricultural, commercial or industrial) or used at multiple locations 

are considered Commercial.  Products designated as “Commercial” are warrantied for 12 months from the date of 
purchase of the product, to the ORIGINAL PURCHASER with proof of purchase, when used for or in commercial 
applications.  Products designated as “Residential” are warrantied for 90 days from the date of purchase of the 
product, to the ORIGINAL PURCHASER with proof of purchase, when used for or in Commercial applications.

 

3.  RENTAL –

 

Products used for Rental or Lease Purposes are warrantied for 45 days from date of purchase of the product, 

to the ORIGINAL PURCHASER with proof of purchase, when used for or in a rental business.

 

 

C.  ITEMS NOT COVERED BY NEW PECO WARRANTY

:

 

1.  ENGINES & BATTERIES:  Engines and Batteries attached to New PECO, Inc. products are covered under their respective 

separate manufacturer warranties and those companies must be contacted directly to file a warranty claim.  Briggs & 
Stratton:  

https://www.briggsandstratton.com/na/en_us/support/warranty.html

  

2.  UNAPPROVED ALTERATION OR MODIFICATION:  All obligations of New PECO, Inc. under this warranty shall be 

terminated if products are altered or modified in any way not approved by New PECO, Inc.

 

3.  ACCIDENTS & NORMAL MAINTENANCE:  This warranty covers ONLY manufacturers defective material and 

workmanship.  It does not cover depreciation or damage caused by normal wear & tear, accident, improper 
maintenance, misuse or abuse of products.   New PECO, Inc. products must be operated and maintained in 
accordance with the instructions furnished in the manuals.  The cost of normal maintenance and normal replacement 
of service items such as belts, cutting blades, hoses, bags, etc., which are not defective shall be paid for by the 
purchaser.

 

4. NO SERVICE CENTER WARRANTY:  The selling Service Center/Dealer makes no warranty on his own on any item 

warranted by New PECO, Inc. unless he delivers to purchaser a separate written warranty certificate specifically 
warranting the item.  The Service Center or Dealer has no authority to make any representation or promise on behalf 
of New PECO, Inc. or to modify the terms of the original warranty in any way.

 

5.  NO REPRESENTATIONS ADDITONAL WARRANTIES, DISCLAIMER:  Neither New PECO, Inc. nor any company affiliated 

with New PECO, Inc. makes any warranties, representations or promises as to the quality of performance of its 
products other than those set forth herein.  Except as described above, New PECO, Inc. makes no other warranties 

AND SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY.

 

6.  REMEDIED EXCLUSIVE:  The only remedies the purchaser has in connection with the breach or performance of any 

warranty on New PECO, Inc. consumer products are set forth above.  In no event will New PECO, Inc. be liable for 
special incidental or consequential damages.

 

Warranty service is available through your local authorized service dealer or distributor.  If you do not know the dealer or 
distributor in your area, search by your zip code on 

www.lawnvac.com

 

or contact our Sales Department at New PECO, Inc.             

800-438-5823 or email 

[email protected]

.

 

PECO LIMITED WARRANTY FOR NEW PRODUCTS

 

2020 (v1.0)

Summary of Contents for 56651201























































Reviews: