Peco 56651201, Operator'S Manual, Page: 13 / 54

13
Main Frame Assembly Installation
It is recommended to have another person assist in the installation of the Main Frame Assembly (Item #1). To install
the Main Frame Assy, position the Main Frame Assy so that both the Lt. and the Rt. Main Frame legs are in between
the Main Frame Assy, refer to Figure A.
Next, align the bolt holes of the Main Frame Assy to the Carriage Bolt holes of either one of the Main Frame Legs.
Then secure the Main Frame Assy using (2) 3/8”-16 x 1" Carriage Bolts (Item #2) and (2) 3/8”-16 Ny-Flange Lock
Nuts (Item #3) PER Leg. Refer to Figure B.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Figure B
Main Frame Leg Installation
Note: Mower’s equipped with the Oil Guard System would need to first install the Frame Spacer Kit P#(A2325) before
proceeding with this step. See page 11 for installation instructions of the Frame Spacer Kit.
To install the Right Main Frame Leg (Item #2) position the Main Frame Leg on the outside of the Right Frame Bracket
and align the lower (3) bolt holes of the Main Frame Leg to those of the Right Frame Bracket. Secure the Main Frame
Leg by using (3) 3/8”-16 x 1” Carriage Bolts (Item #3) and (3) 3/8”-16 Ny-Flange Lock Nuts (Item #4).
Repeat the same procedure for the installation of the Left Main Frame Leg (Item #1).
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Right Frame
Bracket