Pearson OpScan iNSIGHT 70, Installation Manual

Page: 41 / 48

4-1
Chapter 4
Scanner Checkout
Overview
This chapter discusses the procedures for scanner checkout, pre-installed system
software, system verification and backup, and customer hand-off.
Scanner Checkout Procedures
To checkout the OpScan i NSIGHT 70 scanner, refer to the following sections in
the Maintenance Manual for the OpScan iNSIGHT™ 70 Scanner :
•
Hopper and Stacker Operational Checkout (Section 2.6)
•
Sensor Checkout Procedures (Section 2.8)
•
Read Station Adjustments (Section 3.2)
• Check Alignment (Section 5.2.4.8)
•
Hopper Height Adjustments (Section 3.5)
•
Pick Area Adjustments (Section 3.3)
•
Calibrating (and Normalizing) the Scanner (Section E.2)
System Software
OpScan i NSIGHT 70 scanner system software, ScanTools
®
Plus, is pre-installed at
Pearson NCS. For information regarding this software, refer to the ScanTools
®
Plus User’s Guide . This guide includes information on installation, setup, and
configuration. Error messages are not documented in this publication. For
information on the error messages, refer to the online help.