Pearson OpScan iNSIGHT 70, Installation Manual

Page: 38 / 48

Installation of Host Computer and Peripherals
Optional Equipment
3-12
Installation Guide for the OpScan iNSIGHT 70 Scanner
Table 3-1 lists cables, part number, and host computer connectors.
Optional Equipment
Optional equipment includes system printers and the Bar Code Reader.
System Printers
Cabling for system printers is slightly different for standalone and network
configurations.
Standalone Printer
Unpack the printer and place it on the printer cabinet (a separate piece of
furniture). Follow the instructions in the manufacturer's user manuals and install
the printer as a parallel device. Use the 25-pin parallel interface cable to connect
the printer to the port labeled LINE PRINTER located on the scanner's back panel
(bottom and first cutout from the left).
For cabling instructions, do the following:
1.
Attach the power cord.
•
Plug the female end into the back of the printer.
•
Plug the male end into the power strip (or wall outlet).
2.
Attach the parallel interface cable.
• Plug the male end of the parallel interface cable into the appropriate port
on the back of the printer.
• Plug the other end of the cable into the appropriate port labeled
LINE
PRINTER located on the lower left-hand side of the scanner's back panel.
Table 3-1
Part Number Description Type PC Connection
322 701 004 Scanner controller 9-pin D Com1
342 915 006 Hobbes, camera controller 50-pin flat cable Hobbes connector
920 256 005 Bulkhead to Monitor 5 BNCs N/A
913 406 005 Gender Changer HD 15 Female/Female N/A
920 256 013 Bulkhead to PC 5 NBCs/15-pin D Video
920 401 015 Keyboard/Mouse connectors (2) 6-pin DIN (round plug) Keyboard/Mouse
920 401 023 Printer connector 25-pin D Parallel
913 027 017 Phone - 14’ wire male Modular cable 10BaseT
920 255 007 BNC Coaxial, 8’ Coaxial 10Base2
315 941 013 Bar code to PC (optional) 9-pin D Com2