Pearson OpScan iNSIGHT 70, Installation Manual

Page: 18 / 48

Scanner Installation
Preparation
2-2
Installation Guide for the OpScan iNSIGHT 70 Scanner
Software
The following software components are required:
•
Microsoft
®
Windows XP
®
operating system software
Documentation: The appropriate Windows operating system user’s guide
•
Scanner application software
Documentation:
ScanTools
®
Plus User's Guide
•
Scanner Exerciser diagnostic software (or equivalent)
Documentation:
Operator's Guide for the OpScan iNSIGHT™ 70 Scanner and
Maintenance Manual for the OpScan iNSIGHT™ 70 Scanner
Installation Sequence
The installation sequence for the OpScan i NSIGHT 70 scanner is:
1.
Check the installation site to verify that it is ready for setup and installation of
the scanner with its computer, monitor, keyboard, and mouse.
2.
Install the scanner.
3.
Install the computer, monitor, keyboard, mouse, and furniture.
4.
Check the voltages.
5.
Connect the network cables (optional).
6.
Configure the internet network addresses and test the network (optional).
7.
Verify that all software has been pre-loaded.
8.
Run the Scanner Exerciser Utility to check the following:
•
Sheet feeding (See Scan Sheets menu).
• Selecting and printing (See Scan Options menu).
•
Color selection (See Configuration ).
9.
Run Scanner Exerciser to check alignment (See Check Alignment ).
10.
Run the appropriate Camera Setup utility
1
to check and adjust camera/mirror
alignment and focus.
11.
Run the Normalize and Calibrate Utility on the scanner.
12.
Run sample application using ScanTool Plus.
13.
Power off the system.
The above installation sequence and the following instructions serve as a typical
step-by-step guide only. They may not exactly fit your setup.
1. For detailed information on how to run Camera Setup or Fast Camera Setup, refer to the Maintenance
Manual for the OpScan iNSIGHT 70 Scanner , Chapter 3.