6.1.4. Measuring Capacitance
To measure a capacitance, do the following:
1.
Press the
R
key and R appears on the top of the screen
2.
Press the
SET
key till C appears at the top of the screen.
3.
Insert the black leads to COM jack, and red leads to V/
Ω
jack.
4.
Connected the black and red leads with capacitance, then screen shows the capacitance reading.
NOTICE:
When measured value is less than 5 nF capacitance, please use small capacitance measurer of this
multimeter and use relative value measuring mode to improve measuring precision. It will take about
30seconds if capacitance measurement is large than 40µF.
Now, you can see a screen that looks like the following Figure.
Figure 24: Capacitance Measurement
6.1.5 Measuring DC Voltage
To measure a DC voltage, do the following:
1.
Press the
V
key and DCV appears at the top of the screen.
2.
Insert the black lead into the COM banana jack input and the red lead into the V/
Ω
banana jack input.
3.
Connect the red and black leads to the measured point and the measured point voltage value is
displayed on the screen.
-82-
