In order to ensure the correct using and the best efficient service, please carefully read this user’s
manual.
2. Safety Symbols and Terms
2.1. Safety Symbols
These symbols may appear in this manual or on the instrument.
WARNING!
“Warning” identifies conditions and actions that pose hazards to the users.
CAUTION!
“Caution” identifies conditions and actions that may damage the product or other properties.
DANGER:
hight Voltage
Refer to the Manual
Protective
Conductor Terminal
Chassis Ground
Earth (ground)
Terminal
2.1.1. Safety Terms
The following terms may appear on the instrument:
Danger
: The term “Danger” is used in this manual to indicate that when you read this mark, personal injury
may be caused to you immediately.
Warning
: The term “Warning” is used in this manual to indicate that when you read this mark, personal
injury may not be caused to you immediately, but you need to be cautionary.
Notice
:
The term “Notice” is used in this manual to indicate that damages may be caused on this product
or other properties.
3. Performing the General Inspection
3.1. Performing the General Inspection
When you have got a new PeakTech oscilloscope, it is suggested that you should perform a general
inspection on the instrument according to the following steps.
3.2. Check whether there is any Damage on it Due to Transportation
If the packing boxes or foam cushions are found in serous damage, keep them in a proper place till the
complete instrument and accessories have passed the electrical and mechanical tests.
-64-
