5.17. Use USB mass storage device to save waveform data
Insert the USB mass storage device into the USB port and press copy key, then the current waveform data will
be saved inside and the file name in sequence will be WAVE1.BIN, WAVE2.BIN, WAVE3.BIN or WAVE1.BMP,
WAVE2.BMP, WAVE3.BMP……., when it is finished, the screen display “Data have been written!” Then
connect the USB mass storage device with the computer and open the data with software.
Now, you can see a screen that looks like the following Figure.
Figure 19
6. Using the Multimeter
Figure 20: Multimeter Operation Window
-79-
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
