Figure 11: Automatic Scope Measurements
5.10. Freezing the Screen
You can freeze the screen (all readings and waveforms)
1.
Press the
RUN/STOP
key to freeze the screen and
STOP
appears at top right side of the screen.
2.
Press the
RUN/STOP
key once more to resume your measurement.
Figure 12: Freezing the Screen
5.11. Viewing noisy signals
Using the Average acquisition mode, you can smooth out the displayed waveform by averaging multiple data
samples. The number of averaging is selectable from 4, 16, 64, and 128.
NOTE:
In order for average mode to work in the best way, the waveform must be repetitive; As the number of
averaging increases, the slower the waveform update becomes.
-74-
