Precision 500
User Manual
Page 27 2012 © Peak Scientific – Rev 2 – 07/11/12
Switching the unit off
The unit can be switched off at any time using the following procedure.
Firstly press the Stop button on the Touch screen, then press Menu, and finally
select Shut Down.
The unit will take a few moments to depressurize after which the power switch
at the rear of the generator can be switched off.
Cleaning
Clean the outside of the Generator only using warm soapy water and a clean
damp cloth. Ensure the cloth is thoroughly rung out to remove excess fluid
prior to use.
Cleaning should only be undertaken with the power switched
off and the power cord removed from the rear of the
Generator.
Under no circumstances should any solvents or abrasive
cleaning solutions be used as these can contain fumes that
could be harmful to the Generator.
