Precision 500
User Manual
Page 20 2012 © Peak Scientific – Rev 2 – 07/11/12
Automatic Filling
The Precision Hydrogen generator uses an automatic water filling system,
whereby sensors in the unit’s internal water tanks detect when the water level
reaches a minimum.
This then refills the tank using a rear connection to an external DI water supply.
The unit should be connected to the Water supply as shown below.
Using the length of Tygon® tubing and the hose barb fitting from the fittings kit,
attach the barb to the tubing. Then connect one end to the water supply and
the other to the Fill port at the rear of the Precision 500.
