Precision 500
User Manual
Page 21
2012 © Peak Scientific – Rev 2 – 07/11/12
Electrical Connection
Connect the Generator to a 230 volt single-phase supply using the power cord
provided. If the appropriate power cord is not supplied; a new plug, rated to at
least 13 amps, can be fitted by a qualified electrician.
This unit is classified as SAFETY CLASS 1. THIS UNIT MUST
BE EARTHED. Before connecting the unit to the mains supply,
please check the information on the serial plate. The mains
supply must be of the stated AC voltage and frequency.
EARTH/GROUND (E):-
Green & Yellow
or
Green
LIVE (L):-
Brown
or
Black
Neutral (N):-
Blue
or
White
Our electrical requirements are 230VAC n/- 10%. This means that the
Generator can accommodate transients between 207VAC and 253VAC.
