OAFE-2000
IO&M Manual
Paragon Controls Incorporated
22
Revision Level 000
Power must be cycled for network changes to take effect. After making changes to the below
network parameters, please press the left arrow to return to the main screen to save any
changes, then turn off the MTSE at the power switch (S1) for several seconds and then turn the
unit back on.
Baud Rate
The Baud Rate menu allows the user to set a BACnet network baud rate from 9.6K to 76.8Kbps or from
9.6K to 115.2Kbps for Modbus. The selected baud rate should match the network baud rate.
The
default is 38.4Kbps.
MAC Address
The MAC Address menu allows the user to set a device address when connecting to a BACnet
network. The MAC Code identifies each device on a branch of the network and can range from 2 to
127. The MAC Code must be unique within a particular branch of a network however, MAC Codes can
repeat if on another branch of the network.
The default is 002.
Displayed only if BACnet is
selected.
Instance Number
The Instance Number menu allows the user to set a unique device address when connecting to a
BACnet network. The Instance Number is a unique device ID that identifies the device on the entire
network; Instance Numbers cannot repeat within any part of a network and can range from a value of
1,002 to 4,194,302.
The default is 1002
.
Displayed only if BACnet is selected.
Modbus ID
The Modbus ID menu allows the user to enter the unique device address when connect to a Modbus
network. The range is from 001 to 254
. Default is 001. Displayed only if Modbus is selected.
5.2.6. Temperature Compensation & Altitude
This page is for configuring temperature and altitude values for density correction. The temperature
and altitude menu are shown below. Navigate to this menu from the Main Screen by pressing
Setup »
6. Temp. and Altitude
.
Temperature Source
The Temperature Source allows the user to select between three temperature input options (Fixed,
Variable, and Network) for the source of temperature for density correction calculations. If Fixed is
