OAFE-2000
IO&M Manual
Paragon Controls Incorporated
11
Revision Level 000
4. MTSE CONFIGURATIONS
The MTSE can be configured to measure airflow in up to 3 unique Systems and monitor up to 4
additional differential pressure (
Δ
P) points up to a total of 9 sensing points.
4.1. Display
Overview
Shown below is a fully loaded MTSE monitoring (3) independent systems and (4)
Δ
Ps.
Figure 4.1 – Main Screen showing 3 Systems and 4
Δ
P measurement points.
1) System Number: Static text indicating the specific system number.
2) System Tagging: Custom entered tagging information for a more meaningful representation of
where measurement is taking place.
3) System Measurement: Live measurement of flow, velocity, or pressure for the System.
4) Units: Field selectable units for the System Measurement.
5) Max Operating Range: Upper limit of allowed flow measurement value. System Bar graph and
System Analog Output are scaled to this value (Max = 10V or 20mA).
6) Temperature: System Temperature reading from Input source.
7)
Δ
P1 Tag: Customer field entered tagging information for individual, non-System measured
differential pressures.
8)
Δ
P Pressure Measurement: Live measurement of individual, non-System measured pressures.
9)
Δ
P Alarm Value: Field adjustable alarm setpoint value for
Δ
P Pressure Measurement. Can be high
or low triggered setpoint.
10) Setup Menus
11) Diagnostics Menus
12) K-Factor Menu Shortcut
13) Notification: Alarms and Warning Notifications
14) (?) Troubleshooting and Support Pages
