OAFE-2000
IO&M Manual
Paragon Controls Incorporated
16
Revision Level 000
5.2. Setup
Menus
In each of these menus, the parameters for Systems 1, 2, and 3 (description of a System can be found
in Section 4.2) will be configured. For example, if the user is in the Operating Range Menu the
operating range for Systems 1, 2 and 3 will be set in this page. Only Systems that have been
configured in the Factory menu will be displayed in the Setup Menus. Therefore, the pages in the
Setup Menus may look different from your setup if the sensor quantities were only entered for one or
two systems at the Factory.
All Setup Menu pages will write each System’s parameters to internal memory and also be backed up
on the microSD card. Some settings are not System specific and will be applied to all (3) Systems.
These settings are as follows:
a) Altitude and Altitude Units
b) Temperature Units
c) Communications
Each page has a question mark icon (?) in the bottom right corner for Help Dialogue. Selecting this
icon will navigate to a help screen detailing the parameters and their functions of the previous page.
Shown below is the Setup Menu Main page.
The structure of the Setup Menu is shown in the flow chart below. A detailed explanation of each Setup
Menu item is described in the following subsections.