14
- change digit key
•
displays the minimum value of the main input,
•
enters the parameters group level,
•
navigates the selected level,
•
changes the value of a selected parameter – switches to the sub
-
sequent digit,
•
switching the transducer power supply on while holding this key
enters the software update mode through the RS-485 interface,
connection parameters: rate 15200 kb/s, mode 8N2.
- cancel key
•
enters the transducer parameters preview menu (hold for about
3 seconds),
•
exits the transducer parameters preview menu,
•
changes the content displayed in the lower line of the display,
•
cancel the parameter change,
•
completely cancels the programming mode (hold for about
3 seconds).
•
switching the transducer power supply on while holding the key for-
ces reading transducer configuration from PCE-P30U_PAR.CON
file stored on an external SD/SDHC memory card or in the internal
file system memory (depending on the manufacturing variant).
