124
5.10.4. TCP/IP Modbus
PCE-P30U transducers enable access to internal registers using the
Ethernet interface and TCP/IP Modbus Slave protocol. The functions
of Modbus protocol and structure of registers have been discussed
in section 5.9.3-5.9.6. It is required to set an unique IP address
for the transducer and to set connection parameters specified in table
45 to set up the connection.
Table 45
Symbol
Description
Default
value
AddrmTCP
Device address for TCP/IP Modbus protocol
1
PortMbus
TCP Modbus port number
502
TimeMbus
TCP/IP Modbus service closing time [s]
60
no.c.TCP
Maximum number of simultaneous connections
with TCP/IP Modbus
4
The device address (
Ethernet
→
Adr mTCP
)
is the device address for TCP/IP Modbus protocol and does not
correspond to the address value for RS-485 Modbus protocol
(
Mbus 485
→
Adres
). If
Adr mTCP
transducer parameter is set
to “255”, the transducer will bypass the address analysis in the Modbus
protocol frame (broadcast mode).