Paxar 610 User Manual Download Page 55

Page: 55 / 109

Users Manual - 610 / 611 / 612 Printers

6. Printing

•

2. To cancel only the paused batch, press

until you see

PAUSE MENU

Cancel Batch

Then press

Enter / Pause

. The batch is deleted and the printer prints any remaining

batches.

3. To cancel all the batches (including the paused batch), press

until you see

PAUSE MENU

Cancel All

and press

Enter / Pause

. You will see

Cancel Batches?

4. You can

♦

exit without canceling any batches. Press

Escape / Clear

press

to display

and then press

Enter / Pause

. The printer returns to the Pause

menu. Press

to select another function from the Pause Menu, or to return to

Print Mode and print all the batches.

♦

cancel all batches in the print queue. Press

to display

Yes

, then press

Enter /

Pause

. You will see

Cancel Format?

Press

then press

Enter / Pause

If password protection is enabled, you will be prompted to enter a password before
the formats, graphics, and fonts are deleted. Press

Feed / Cut

three times and then

press

Enter / Pause

Summary of Contents for 610














































































































Search results

Summary of Contents for 610

Reviews:

Related manuals for 610

Brands by name

Popular brands

Paxar 610, User Manual

Search results

Summary of Contents for 610

Reviews:

Related manuals for 610

Brands by name

Popular brands