Paxar 610 User Manual Download Page 32

Page: 32 / 109

•

3. Setting Supply Options

Users Manual - 610 / 611 / 612 Printers

SUPPLY

Yes

3. Press

to see the other options. After you display the option you want,

press

Enter / Pause

. Press

Escape / Clear

twice to exit to the Main menu.

__________

If you set the Ribbon option to Yes, install

a ribbon before printing.

If you want to use a high energy ribbon,

select high energy for the ribbon

every time the printer is turned on.

__________

Batch Separators

The 610 / 611 / 612 printers do not support Batch Separators. Paxar strongly recommends
leaving to Batch Separator selection to “NO”.

Feed Mode

You can use continuous or on-demand printing. On-demand printing allows you to remove
a label before printing the next one.

To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.

1. Press

until you see

SUPPLY

Feed Mode

2. Press

Enter / Pause

to set the feed mode. You will see the current setting, for

example:

FEED MODE

Continuous

Summary of Contents for 610














































































































Search results

Summary of Contents for 610

Reviews:

Related manuals for 610

Brands by name

Popular brands

Paxar 610, User Manual

Search results

Summary of Contents for 610

Reviews:

Related manuals for 610

Brands by name

Popular brands